Assign Global Hot Spares; Select Wizard - HP D5970A - NetServer - LCII Configuration Manual

Chapter 5
NOTE Clearing the configuration does not affect the rebuild rate.

Assign Global Hot Spares

NOTE Refer to Worksheet A when assigning hot spares.
To assign any physical drives to the global hot spare pool:
1. Click on a Ready physical drive in the Physical Devices box. This drive
must have capacity that is at least as great as any drive it will replace.
You can select more than one Ready drive if you want to create more than
one global hot spare. Clicking on a Ready drive either selects it or
deselects it.
2. Drag the selected drives into the global hot spare pool.
NOTE To check the capacity of a physical drive, double-click on it to
display its properties.

Select Wizard

NOTE If any physical drives have been moved, added, removed,
changed, or changed in state since HP NetRAID Assistant was
started, rescan the drives by choosing the Adapter menu and
then selecting the Rescan option.
To launch the HP NetRAID Assistant Wizard:
1. Select the Configuration menu.
2. Choose the Wizard. The Wizard starting window is displayed, as shown
in Figure 5-3, with a choice of Custom and Automatic configuration
modes.
Configuration
45