HP D5970A - NetServer - LCII Configuration Manual page 56

Chapter 5
Figure 5-5. HP NetRAID Assistant Wizard Logical Drive Definition Window
The Logical Drive Parameters box shows the number of the logical drive
being defined and has boxes to set its RAID level and size.
The Span Arrays check box turns array spanning on or off.
The Advanced button leads to more parameters, which are preset but can
be changed.
The Logical Devices box depicts the arrays, the logical drives on each
array, and the global hot spare pool. Logical drives are labeled as new and
as LD0 through LD7. Click on the + sign in the yellow diamond if the
view is collapsed (logical drives are hidden).
The HP NetRAID Assistant Wizard is ready for you to set the parameters of the
new logical drive.
50
Configuration