HP D5970A - NetServer - LCII Installation And User Manual page 80

Chapter 4
Finish Dialog Tab
Figure 4-38. Assisted Configuration->New Configuration->Finish
When you get to the Finish dialog box, perform the following steps (see
Figure 4-38):
1. Examine the Configuration Summary for details about the configuration
that RAID Assistant will set up.
If you want to start over, click the Welcome tab or Cancel button.
If you want to change your answers to any of the questions you were
asked, click the appropriate tab to return to that screen.
If you want to view the configuration before it is applied to the
controller, click the Details button.
You will be taken to an equivalent of the Disk Arrays page as shown in
Manual Configuration, where you can only view and close the details
window.
2. If you accept the configuration as presented, click the Apply button at the
Finish page to apply the new configuration to the controller.
A warning confirmation box appears as shown in Figure 4-39.
74
Configuration