HP D5970A - NetServer - LCII Installation And User Manual page 142

Chapter 6
Figure 6-13. WARNING Message for Flash
9. Type Yes, and then click OK at the confirmation message.
The Flash Utility writes the image data to RAM. A message prompt
displays to program the flash. See Figure 6-14.
Figure 6-14. Image Data/Program Flash Message
10. Click OK in the message prompt. See Figure 6-14.
After a few moments, the flash is updated with the new firmware contained
in the .IMA file. A message prompt appears asking you to reset the
controller. See Figure 6-15.
136
Figure 6-15. Controller Reset Message
Maintenance Processes