Consistency Check Status - HP D5970A - NetServer - LCII Installation And User Manual

Chapter 5
1. Click the Cancel.. button to stop the rebuild.
You may need to check the View menu to see if Rebuild Status is still
enabled.
If so, you may need to cancel other rebuilds as well.
2. Click the Close button to close the Rebuild Status box at any time.

Consistency Check Status

If a consistency check process is currently underway, open the Consistency Check
Status box to monitor the progress, or cancel the process, as shown in Figure 5-27.
Figure 5-27. Selecting Consistency Check Status
Figure 5-28. Consistency Check Status Box
The Consistency Check Status box displays the progress of a logical drive
consistency check. See Figure 5-28.
Monitoring
123