Fcarray Assistant Diskette Preparation - HP D5970A - NetServer - LCII Installation And User Manual

Chapter 2
software updates since the creation of the CD-ROM and indicates if updates are
required and how to obtain the updates.
Each version of the CD-ROM has a four-digit Document Number printed on the
disk. Obtain the Status Report for the CD-ROM in one of the following ways:
FAX: Call HP's FAX system at 1-800-333-1917 (or 1-208-344-4809 from
your FAX machine).
Request a FAX using the CD-ROM Document Number.
Internet: Access the URL at:
http://www.hp.com/netserver/servsup
Click the line that corresponds to the CD-ROM Document Number.
Internet FTP: Address: //ftp.hp.com/pub/servers
BBS: Call 1-208-344-1691; download <document-number>.txt from the
NSNAVCD library.
CompuServe: GO HPPC; download <document-number>.txt from the HP
NetServer library.

FCArray Assistant Diskette Preparation

This procedure creates the necessary floppy diskette(s) used to install the FCArray
Assistant software from within Windows NT 4.0, on both the managed server and
the remote management workstation.
To create the necessary diskette(s) used for installation, refer to the following
procedure.
1. Insert the HP NetServer Navigator CD-ROM into the CD-ROM drive with
the Windows NT 4.0 system operating.
This initiates the auto-run feature of Windows NT 4.0.
2. From the HP Navigator Main menu, choose NetServer Utilities.
3. Select More NetServer Utilities and then choose Diskette Library.
4. From the Diskette Library, select the FCArray Assistant for
Windows NT in the diskette library.
5. Follow the on-screen instructions to create the FCArray Assistant
diskettes (2).
6. Label the diskette(s) FCArray Assistant Installation: Disk #1 and Disk #2.
7. Remove the HP NetServer Navigator CD-ROM from the CD-ROM drive.
8
FCArray Assistant Software installation