Download Print this page

HP D5970A - NetServer - LCII Installation And User Manual: Software Modifications; Dacevent Command; Dacevent Command Line Parameters

Hp netserver fcarray assistant - installation and user guide.
Hide thumbs

Advertisement

Chapter 2

Software Modifications

These software modifications are only required if you want to be notified of
controller events. However, HP recommends making the modification now.

DACEVENT Command

Once the FCArray Assistant Server software installation is complete, the
DACEVENT command must be modified to include the IP addresses or names of
all the client systems used with this server. This is done by manually editing the
DACSCM.CNF file. This file is located at:
\WinNT\System32\Drivers\DacSrv\dacscm.cnf
1. Open DACSCM.CNF in a text editor, such as Notepad.
2. Modify the DACEVENT line manually.
The DACEVENT line requires (after each -h parameter) the IP addresses
or names of the client systems used with this server. See Table 2-1.
See the text of the DACSCM.CNF file for details.

DACEVENT Command Line Parameters

Table 2-1. DACEVENT Command Line Parameters
Value(s) / Default /
Parameter
Example
Values = <IP Address> or
-h :
<Name>
Default = N/A
Example:
dacevent.exe -h 192.9.10.59
(sends events to client with
IP Address 192.9.10.59)
FCArray Assistant Software Information
Description
Define Clients to Receive
Events: Specifies the IP
Address or Name (for Windows
NT) of a client system to which
FCArray Assistant Server will
send events. These events can
be seen in the FCArray
Assistant Client Log
Information Viewer.
13

Advertisement

   Related Manuals for HP D5970A - NetServer - LCII

Comments to this Manuals

Symbols: 0
Latest comments: