HP D5970A - NetServer - LCII Installation And User Manual page 87

Chapter 4
Controller 1/Port 1. Load balancing is achieved by spreading the configured LUNs
across both these controllers.
PW R
Default Port 1 Port 0
Active
FCArray Controller 1
Figure 4-43. FCArray Controller Physical Layout
Low-Profile
Drives
Half-Height
Drives
Figure 4-44. FCArray Controller Layout/SCSI ID Assignment
LUN Mapping Tab
The FCArray Assistant implements LUN Mapping by allowing the user to map
Logical Unit Numbers (LUNs) to specific controller/port combinations. To
configure the HP Rack Storage/12FC for a Simplex or Dual Active configuration,
refer to the following procedure. See Figures 4-43 through 4-46.
Rack Storage/12FC (rear view)
PW R
Port 1 Port 0
FCArray Controller 0
(Rear View)
Rack Storage/12FC (front view)
0 1 2 3 8 91011 12131415
0 1 3 8 10 11 13 14
Channel 0 Channel 1
(Front View)
Configuration
Default
Active
81