Linux-Preinstalled Workstations; Starting The Linux Operating System; Restoring The Linux Operating System - HP Xw9300 - Workstation - 1 GB RAM Technical Reference Manual

Linux-Preinstalled Workstations

If you have a Linux-preinstalled HP Workstation, follow the instructions in this section to set up your OS and
software.
After the boot process completes, you can view additional HP Linux documentation by opening your
Internet browser (the browser is automatically set to use the local HP documentation page as its default).
You can also access Linux Web links for Red Hat (Internet access required) by using your Internet browser.
NOTE: For additional information on setting up Linux-preinstalled or Linux-enabled workstations, refer to
the HP User Manual for Linux, which is located at http://www.hp.com/support/linux_user_manual. For
more information about HP and Linux, visit http://www.hp.com/linux.

Starting the Linux Operating System

The first time the workstation is booted, the Red Hat First Boot utility displays. This program enables you to
enter your password, network, graphics, time, and keyboard settings for your workstation.
CAUTION: After the automatic installation has begun, DO NOT TURN OFF THE WORKSTATION UNTIL
THE PROCESS IS COMPLETE. Turning off the workstation during the installation process might damage the
software that runs the workstation or prevent its proper installation.
NOTE: When you enable the YPBind feature in the Network tab of the Linux Setup Tool, you might get a
blank screen for 15–30 seconds after you have selected, saved all of your settings, and have exited the
utility. This is normal behavior. The boot process continues its execution after the screen returns.

Restoring the Linux Operating System

NOTE: To restore the Linux OS, the HP Driver CD and Red Hat box set are required. To get any new
enhancements, download the latest HP Driver CD.
NOTE: Linux does not support mixed drive types for a manufacturing preload. When restoring the
operating system, mixed drive types can be handled with the restoring media.
Downloading the Latest HP Driver CD
1. Download the ISO image to a local hard drive from the HP support Web site at
http://www.hp.com/go/workstationsupport.
a. Select your HP Workstation from the list.
b. Click download drivers and software.
c. Select the Linux OS that matches your box set.
d. Select the latest version from the Utility Tools section.
e. Download and unpack it (tar zxvf filename .tgz).
Installing the Operating System and Software 35