Energy Star; Energy Star Compliance - HP Xw9300 - Workstation - 1 GB RAM Technical Reference Manual

Hp xw9300 service and technical reference guide
Hide thumbs Also See for Xw9300 - Workstation - 1 GB RAM:
Table of Contents

Advertisement

ENERGY STAR

The ENERGY STAR® program, a government-backed initiative, promotes energy efficiency by identifying
ways to reduce energy consumption. Select HP workstations participate in the ENERGY STAR program.
NOTE:
ENERGY STAR is not supported on Linux-based workstations.
For those workstations that support ENERGY STAR and have it enabled, the power management features
will be set as follows:
Monitor—goes into sleep mode after 20 minutes of inactivity.
System—goes into Standby mode after 20 minutes of inactivity.
Hard Drive—goes into power savings mode after the system goes into Standby mode.
NOTE:
If you have to restore the operating system, reset the ENERGY STAR settings (if applicable) after
the restore.
To verify the factory default power settings for your product, select Start > Control Panel and
double-click Power Options.

ENERGY STAR Compliance

HP products purchased with the ENERGY STAR configuration are compliant with the U.S. Environmental
Protection Agency (EPA) ENERGY STAR Computers Program. The EPA ENERGY STAR configuration does
not imply endorsement by the EPA. As an ENERGY STAR Partner, HP has determined that products with the
ENERGY STAR configuration meet the ENERGY STAR guidelines for energy efficiency.
The ENERGY STAR Computers Program was created by the EPA to promote energy efficiency and reduce
air pollution through more energy-efficient equipment in homes, offices, and factories. HP products achieve
this by reducing the power consumption when not being used.
ENERGY STAR on HP Workstations uses ACPI power management. The system can wake as a result of a
user action (keyboard or mouse) or from the network or a modem.
The Power Management feature, when used in conjunction with an external ENERGY STAR-compliant
monitor, will support the power-down features of the monitor. The Power Management feature allows an
external monitor to go into low-power mode when the energy save timeout occurs.
CAUTION:
Using the Energy Save Monitor feature with non-ENERGY STAR-compliant monitors might
cause video distortion when the Energy Save timeout occurs.
32
Product Overview

Advertisement

Table of Contents
loading

Table of Contents