Power Supply - HP Xw9300 - Workstation - 1 GB RAM Technical Reference Manual

Power Supply

To remove the power supply:
1. Disconnect power from the system
2. Disconnect the power supply from the system board.
3. Disconnect the power supply cables from the optical drives, diskette drive, hard drives, and graphics
cards (select models only).
4. Remove the four screws
5. Slide the power supply toward the front and lift up
To replace the power supply, reverse the previous steps.
(page 79) and remove the access panel
1 from the back panel.
(page
2
to remove it from the chassis.
Removal and Replacement of Components
86).
91