Sata Guidelines - HP Xw9300 - Workstation - 1 GB RAM Technical Reference Manual

SATA Guidelines

NOTE: These systems support a mixed configuration of SCSI and SATA hard drives. The HP xw9300
Workstation does not support IDE hard drives.
When installing and operating SATA devices:
• Connect the SATA hard drive from the system board to the hard drive with the SATA cable (326965-
006).
• If using a SATA controller card, connect the 4-4 pin LED cable (included with SATA controller board)
from the card header "JP1" (4-pin header) to the system board header labeled "HD LED" (4-pin
header at P29).
For complete and current information on supported accessories and components, visit
http://partsurfer.hp.com.
178 SATA Devices