Battery
CAUTION:
Before removing the battery, be sure your CMOS settings are backed up because all CMOS
settings are lost when the battery is removed. To back up the CMOS settings, use Computer Setup and run
the Save to Diskette option from the File menu.
To remove the battery:
1.
Disconnect power from the system
2.
On the system board, press on the release tab of the battery holder
3.
Lift the battery straight up
To replace the battery, slide the battery back in until it snaps back into place.
(page
79) and remove the access panel
2
.
(page
86).
1
.
Removal and Replacement of Components 105