Diskette Drive - HP Xw9300 - Workstation - 1 GB RAM Technical Reference Manual

Diskette Drive

To remove a diskette drive:
1. Disconnect power from the system
front bezel (page
2. Disconnect the data
3. While lifting the green drivelock release tab
4. Remove the diskette drive by removing the two M3 screws
diskette drive
(page
87).
1 and power 2 cables from the back of the diskette drive.
2 from the bracket.
79), remove the access panel
1 , slide the drive forward
1 in the rearmost holes and sliding the
Removal and Replacement of Components 109
(page 86), and remove the
2 out of the chassis.