Installing The Operating System And Software; Microsoft Windows Xp Professional; Linux-Preinstalled Workstations - HP Xw8200 - Workstation - 1 GB RAM Technical Reference Manual

Installing the Operating System and Software

The following section discusses the operating system and HP software installation procedures.

Microsoft Windows XP Professional

The first time you turn on your workstation, you are prompted to select a language for the operating
system. After selecting the language, read and follow the instructions on the screen to complete the
installation of the operating system. This takes approximately 10 minutes, depending on the system
hardware configuration. During the process, do not turn off your workstation unless you are directed to
do so.
Installing or Upgrading Device Drivers
To install hardware devices, such as a printer, a display adapter, or network adapter after the operating
system installation is completed, the operating system needs access to the appropriate software drivers
for the devices. Device drivers are usually provided on a CD supplied with the peripheral device.
Some existing peripheral devices might not have been shipped with drivers developed for Windows XP.
To locate the most current device drivers, visit http://www.hp.com/go/workstationsupport.
Creating a Restore Diskette
To create a restore diskette for Windows XP, select Start>Programs>Accessories>System
Tools>System Restore and follow the on-screen instructions.

Linux-Preinstalled Workstations

If you have a Linux-preinstalled workstation, follow the instructions in this section to set up your OS and
software.
After the boot process completes, you can view additional HP Linux documentation by opening your
Internet browser (the browser is automatically set to use the local HP documentation page as its default).
You can also access Linux Web links for Red Hat (Internet access required) by using your Internet
browser.
NOTE For additional information concerning the setup of Linux-preinstalled or Linux-enabled
http://www.hp.com/support/
workstations, refer to the HP User Manual for Linux , which is located at
linux_user_manual.
For more information about HP and Linux, visit http://www.hp.com/linux.
Starting Up the Linux Operating System
The first time the workstation is booted, the Red Hat First Boot utility displays. This program enables you
to enter your password, network, graphics, time, and keyboard settings for your workstation.
CAUTION After the automatic installation has begun, DO NOT TURN OFF THE WORKSTATION UNTIL
THE PROCESS IS COMPLETE. Turning off the workstation during the installation process might
damage the software that runs the workstation or prevent its proper installation.
28 INSTALLING OR RESTORING THE OPERATING SYSTEM