Flash (BIOS) Update Procedure
1. Prepare a bootable DOS diskette with
PHLASH16.EXE, and one XXXXXXX.WPH files
NOTE: The PHLASH16.EXE is flash utility programs.
The XXXXXXX.WPH is BIOS source code
binary file.
2. Insert the diskette and boot from drive A.
WARNING: Do not boot with any memory related
driver such as HIMEM.SYS, EMS.SYS....
3. At the DOS prompt, type A:> PHLASH16
XXXXXXX.WPH then press Enter.
4. The program updates the BIOS automatically.
WARNING: Do not turn off the system power while the
BIOS is programming, or the flash ROM will be
destroyed.
5. Power off system after the BIOS is completely
updated.
General Information 11