Table of Contents
Advertisement
Flash (BIOS) Update Procedure
NOTE: The flash update procedure does not change the model number and
serial number information in BIOS.
1. Prepare a bootable DOS diskette with FLASH818.EXE file
NOTE: The FLASH818.EXE is a flash utility program. Insert the diskette and
boot from drive A.
WARNING: Do not boot with any memory related driver such as HIMEM.SYS,
EMS.SYS....
2. At the DOS prompt A:>, type A:> FLASH818 R01-XX.ROM / A+ /C then
press Enter.
NOTE: R01-XX.ROM is the BIOS version. Depended on the BIOS version,
type the BIOS program name.
3. The program updates the BIOS automatically.
IMPORTANT: Verify the BIOS checksum value shown on screen.
4. Wait for the update to complete (indicated by the beeps).
WARNING: Do not turn off the system power while the BIOS is programming,
or the flash ROM will be destroyed.
5. Power off the system after the BIOS is completely updated.
10
Advertisement
Table of Contents
