Audio (Not Supported By Diagnostics Program) - IBM NetVista Hardware Maintenance Manual

Audio (Not Supported by Diagnostics
Program)
IMPORTANT: Audio tests for the sound card cannot
be carried out in the PC-Doctor DOS
diagnostics program. It is, however, possible to
carry out a dial tone test for the modem.
While performing this check, you may need to
enter and exit Microsoft Windows ME or
Windows 2K several times. When instructed to
select an icon or button, double click on the
item with the mouse.
NOTE: For more information about using Microsoft
Windows ME or Windows 2K, see the user's
guide that came with the computer.
If an operating system other than Microsoft
Windows ME or Windows 2K is installed, the
program screens and icons may differ from
these instructions.
001 - START
•
Power off the system unit.
•
Remove all adapter cards.
•
Connect a hard disk drive with pre-loaded
Windows ME or Windows 2K.
•
Power on the system unit.
•
Load default settings in setup (audio may be
disabled).
002 - DO ANY POST MESSAGES, ERROR
CODES, BEEPS, OR SYMPTOMS APPEAR? (YES,
READ AHEAD. NO, GO TO STEP 003)
•
Go to "Index of Symptoms, Messages, Error
Codes, or Beeps" on page 32.
•
End.
003 - DO ANY MESSAGES OR ERROR CODES
DISPLAY AFTER POST COMPLETES BUT
BEFORE MICROSOFT Windows ME or Windows
2K STARTS? (YES, READ AHEAD. NO, GO TO
STEP 004)
NOTE: If POST does not complete, answer this
question "No."
•
Ensure that Windows ME or Windows 2K is
54 IBM Desktop System HMM