Table of Contents
Advertisement
6. Double click on the component you want to change.
7. Enter new data in the Value field, then click Apply.
Alert on LAN
Alert on LAN provides notification of changes in the computer, even when the
computer power is turned off. Working with DMI and Wake on LAN
technologies, Alert on LAN helps to manage and monitor the hardware and
software features of the computer. Alert on LAN generates notifications to the
server of these occurrences:
v Computer disconnected from the network
v Computer unplugged from the power outlet
v All POST errors
v Operating system or POST hang condition
Alert on LAN events are configured to be Enabled or Disabled from the LAN
server only, and not from the computer. See the LAN administrator for
configuration status information.
BIOS levels
An incorrect level of BIOS can cause false errors and unnecessary FRU
replacement. Use the following information to determine the current level of BIOS
installed in the computer, the latest BIOS available for the computer, and where to
obtain the latest level of BIOS.
v Current Level BIOS information
v Sources for determining the latest level BIOS available
v Sources for obtaining the latest level BIOS available
To update (flash) the BIOS, see "Flash (BIOS/VPD) update procedure" on page 89.
Flash (BIOS/VPD) update procedure
1. Power-off the computer.
– Run the Configuration Utility to determine the level of BIOS installed.
1. IBM Home Page
http://www.ibm.com/pc/us/
2. PC PartnerInfo-Technical Database (CTSTIPS.NSF)
®
3. HelpCenter
4. Levels 1 and 2 Support
®
5. RETAIN
1. IBM Home Page
http://www.ibm.com/pc/us/
2. PC PartnerInfo-Technical Database (CTSTIPS.NSF)
3. HelpCenter
4. Levels 1 and 2 Support
Attention:
Refer to the information label located inside the system unit cover for any model-specific
information.
Chapter 9. Additional Service Information
®
89
Advertisement
Table of Contents
