IBM NetVista Hardware Maintenance Manual page 85

program screens and icons may differ from
these instructions.
1. Start Microsoft Windows ME or Windows 2K.
2. Select the Start icon.
3. Select Program, then select Accessories, Hyper
Terminal.
4. Select an on-line service station, dial and connect
to it.
004 - CAN THE MODEM DIAL OUT AND
CONNECT TO ANY BBS SUCCESSFULLY? (YES,
READ AHEAD. NO, GO TO STEP 005.)
•
The modem adapter functions normally.
•
End.
005 -
•
Ensure that Windows ME or Windows 2K is
properly installed, then power off the system unit.
•
Plug the modem adapter card into a different PCI
expansion slot.
•
Go to step 002.
•
If the error symptom still remains, replace the
modem adapter card.
•
End.
Check Procedures 53