IBM NetVista Hardware Maintenance Manual page 73

Error Symptoms
Diskette drive LED fails to
light, and the drive is unable
to access for more than 2
minutes.
Diskette drive test failed.
NOTE:
Ensure hard disk drive is configured correctly in
Configuration/Setup Utility, and cables/jumpers
are set correctly before diagnosing any hard disk
drive problems.
Hard disk drive test failed.
Hard disk drive format error. 1. Enter Configuration/
Hard disk drive write error.
1. Diskette
2. Diskette drive power
3. Diskette drive
4. Diskette drive
5. System board
1. Diskette
2. Diskette drive
3. Diskette drive cable
4. System board
Hard Disk Drive
1. Enter Configuration/
2. Hard disk drive cable.
3. Hard disk drive.
4. System board.
2. Hard disk drive cable.
3. Hard disk drive.
4. System board.
1. Enter Configuration/
2. Hard disk drive.
Action/FRU
connection/cable
Setup Utility and Load
default settings.
Setup Utility and Load
default settings.
Setup Utility and Load
default settings.
Check Procedures 41