IBM NetVista Hardware Maintenance Manual page 87

properly installed.
•
End.
004 -
•
Perform the following under Windows ME or
Windows 2K.
NOTE: If an operating system other than Microsoft
Windows ME or Windows 2K is installed, the
program screens and icons may differ from
these instructions.
1. Start Microsoft Windows ME or Windows 2K.
2. Select the Start icon.
3. Select Settings, then select Control Panel.
4. Select the Sound icon.
5. In the Sound window, select chimes from the
Names field. (To test other adapter card software,
select an action from a menu in that software.)
005 - IS THE PREVIEW BUTTON, OR ACTION IN
OTHER SOFTWARE, SELECTABLE ON THE
SCREEN (SHOWN IN BLACK AND NOT GRAY)?
(YES, GO TO STEP 006. NO, READ AHEAD.)
•
Ensure that Windows ME or Windows 2K is
properly installed.
•
Go to step 001.
006 -
•
Select the Preview button from the Sound window.
007 - DO YOU HEAR ANY SOUND FROM THE
SPEAKER? (YES, READ AHEAD. NO, GO TO
STEP 008.)
•
The audio feature is functioning normally. Click
Cancel to close the dialog box. Exit Microsoft
Windows ME or Windows 2K.
•
If the symptom remains or has changed, go to
"Index of Symptoms, Messages, Error Codes, or
Beeps" on page 32.
•
End.
008 -
•
Make sure that the volume control is not turned
low.
Check Procedures 55