Agp Card - IBM NetVista Hardware Maintenance Manual

AGP Card

NOTE: Before removing an AGP card, note the
location of the AGP card and any cables.
•
Position the system unit such that the card is
accessible to you.
•
If the AGP card has cables, disconnect them. Be
sure to take note where those cables are
connected and how they are oriented. You will
need to reconnect those cables when you reinstall
the card.
•
Remove the AGP card screw.
•
Release the latch, and carefully pull the AGP card
straight out of the slot so that the card does not
bend.
General Information 99