The Psr-8000 Display & Display-Based Controls; The Mixing Console Buttons; Liquid Crystal Display (Lcd); Lcd (A-J) Buttons - Yamaha PortaTone PSR-8000 Owner's Manual

The PSR-8000 Display & Display-based Controls
The PSR-8000 Display & Display-based Controls
The PSR-8000 makes general operation and programming easier than ever with
a large backlit LCD display panel and multi-function controls. The 10 LCD (A—J)
buttons — five on either side of the display panel — and 8 LCD dials below the
display perform the function indicated by the adjacent section of the display.
In the example display shown here, for example, the LCD dial immediately
below LEAD on the display can be used to adjust the volume of the LEAD voice.
Rotate the dial upward to increase the volume, or rotate the dial downward to
decrease the volume.
In the same way, the LCD button immediately to the right of LEAD voice
window on the display is used to set the normal octave for the lead voice ("0"),
shift it one octave up ("+1"), or one octave down ("–1").

The MIXING CONSOLE Buttons

The lower section of the normal play mode display, shown
to the right, provides individual volume controls for the PSR-
8000's song, accompaniment, multi pad, left, right 1, right 2,
lead, and microphone sound. Pressing the [FADER] button
alternately switches between this display and the individual
auto-accompaniment part volume controls: rhythm 1, rhythm 2,
bass, chord 1, chord 2, pad, phrase 1, and phrase 2. This is
essentially a "mixer" that you will use to achieve the best overall
balance for your musical needs.
A full-screen mixing console which provides access to a
wide range of controls for each part can be selected by pressing
the [FULL] button. Full details are provided in the "The Mixing
Console" section on page 39.
A
B
C
D
E
..............................
PART
PART
F
G
H
I
J
19