One-Touch Key Program Settings - Oki OKIOFFICE44 Service Manual

One-Touch Key Program Settings [Table 2.9.4} (1/4)
F+OT
Item
No.
1 Delayed transmission (TX)
2 Broadcast/memory transmission
3 Confidential transmission
4 Relay broadcast initiate transmission
5 Polling transmission/reception
6 Report printing
Installation Procedure
Specifications
This function enters a message transmission time(s) and location(s)
for execution at a specified time.
To make a one-time selection of the memory transmission mode.
Max. 56 remote locations can be specified by the following means:
• One-touch key (with of without a group list)
• Two-digit auto dial code
• Keypad dial number
When multiple locations are specified for one broadcast,
1) The fax can print a broadcast confirmation report, if specified
in operating sequence.
To program the mail box number 01 to 64.
Available remote station's mail box numbers:
OKIFAX 2400/2600:
OKIFAX 1000:
OKIFAX 1050:
OKIFAX 2300:
OKIFAX 2350:
OKIFAX 2450:
OKIFAX 5300:
OKIFAX 5600:
This function automatically originates a message call via relay key
station (which must be equipped with OKIFAX 2600)
Up to 99 locations.
To program relay password.
To enable or disable the relay report.
Polling TX:
The documents placed on the feeder can be collected by a remote
station.
Polling RX:
The fax can collect documents from one remote station.
1. Activity report
2. Broadcast message confirmation report
(Multi location)
3. Phone directory report
4. Configuration report
(Serviceman report if service bit sets to ON.)
5. Protocol dump report
* TF + 01 (Sets to on Service bit)
Log. report
* TF + 01 (Sets to on Service bit)
2 - 42
01 to 40
01 to 16
01 to 08
01 to 16
01 to 08
01 to 16
01 to 08
01 to 16
OKIOFFICE 44
Service Manual, P/N 59276801