Oki OKIOFFICE44 Service Manual page 25

No.
12 Copy stacking
13 Scanning resolution
14 Image scanning method
15 Contrast control
16 Recording resolution
17 Recording system
18 Skew of recording paper
19 Copy darkness
20 Copy uniformity
General Information
Table 1.5.1 (5/11) Basic Performance Specifications
Item
The fax can discharge printed copies and stack them faceup.
Maximum sheets on the copy stacker: 30*
Note*: Oki Data recommended paper
Horizontal:
Vertical:
Letter size (1728-bit) contact image sensor
1) Automatic background sensing
2) The LIGHT and DARK contrasts will automatically be ad-
Horizontal:
Vertical:
Electro-photographic printing
1) 211.3mm (2496 bit) or 216.7mm (2560 bit) LED print head
Maximum allowable skew is + or - 1 mm over an advance of 100
mm. (.03937 inches over 3.937 inches)
1) Black image:
2) White background:
Printed copies will exhibit a uniform density of the printed and
background area:
1) From edge to edge:
2) From copy to the next copy:
Specifications
• 8 pel/mm
Transmission mode:
• STD 3.85 line/mm
FINE 7.7 line/mm
EX.FINE 15.4 line/mm
COPY mode:
FINE: 7.7 line/mm
EXFINE 15.4 line/mm
A continuous document background of 0.3 OD (optical density)
or less will be transmitted as white.
justed to improve image quality.
• 300 dot/inch
• STD: 3.85 line/mm
FINE: 7.7 line/mm
Greater than 1.0 OD (Optical density)
Not greater than 0.2 OD
(Optical density)
1 - 13
25% unit
30% unit
OKIOFFICE 44
Service Manual, P/N 59276801