Reports And Lists - Oki OKIOFFICE44 Service Manual

1.6

Reports and Lists

Table 1.6.1 shows Reports and Lists Specifications.
Note: F +OT: Press FUNCTION and One-touch key
FP:
TF:
No. Item
1 Call-back message
2 Sender ID
3 Transmitting subscriber identifica-
tion (TSI) printing
4 Cancel report
(Power outage report)
5 Activity report
6 Message confirmation report
7 Broadcast entry report
8 Broadcast confirmation report
General Information
Function program setting
Technical function setting
Table 1.6.1 (1/2) Reports and Lists Specifications
The transmitter sends a call-back message to the receiver only
when the receiver does not respond to voice request of the transmit-
ter.
The fax can transmit a programmed alphanumeric message, such as
company's name, consisting of up to 32 characters.
This is an FCC Requirement in the United States
* (Outside only)
Received TSI can be printed at the top of the received page.
* TF + 05 (To enable or disable this function)
The fax can automatically print out a power-outage report when the
power off condition occurs.
The fax can print out an activity report manually, or automatically,
when 30 communications are recorded.
* REPORT PRINTOUT+1 (Manual printout)
The fax can print out a message confirmation report manually or
automatically in the following cases.
(1) When COPY key is pressed after a single location
* FP + 01 (To enable or disable automatic printing)
The fax can print out a broadcast entry report if specified during
operating sequence of a broadcast.
The fax can print out a broadcast confirmation report manually or
automatically.
* COPY key (Manual printout): Pressed after a broadcast.
* REPORT PRINTOUT + 2 (Manual printout)
* FP +02 (To enable or disable automatic printing)
Specifications
call, this report can be printed.
(Manual printout)
1 - 20
Service Manual, P/N 59276801
OKIOFFICE 44