2.9.9
Dial Parameters Settings
Procedure
The following shows the case in which the service bit is on.
To begin, press SELECT FUNCTION key once and
one-touch key No. 9 in the standby mode.
(with no message in memory)
Enter 2 using the ten-key pad.
Press
key.
Installation Procedure
Operations:
SELECT FUNCTION (OT)
MEMORY AVAIL.=100%
Press OT9
1:FUNC. PROGRAMMING
YES( )
2
2:DIAL PARAMETER
YES( )
2 - 60 OKIOFFICE 44 Service Manual, P/N 59276801
The display shows:
NO( /1-4)
NO( /1-4)
To DIAL PARAMETERS