Option (Board-Memory: Mem, Board-Ctr; Pc Interface) - Oki OKIOFFICE44 Service Manual

4.1.3.7 Option (Board-Memory: MEM, Board-CTR; PC Interface)

(1) Disassembly procedure
a) Remove the Cover-Rear by removing the screw 1
and the part of the fixing hooks.
b) Remove the Plate-Earth (PC I/F)
c) Board-Memory (MEM):
Remove Board-Memory on the connector CN13 of
the Board-R44, and removing the screw to the
separation plate.
d) Board-PC Interface (CTR):
Remove the Board-Memory on the connector
CN11 and CN12 of the Board-R44, and removing
the two screws to the pc-earth plate.
Note: Install on the inner side connector for the
Board-Memory (MEM) and outside connec-
tor for the Board-PC interface (CTR).
Disassembly
(CP4.1 Fig. 07)
4 - 16
Board-Memory
Board-CTR
(PC Interface)
Plate-Earth
(PC I/F)
Rear Cover
Screw 1
Service Manual, P/N 59276801
OKIOFFICE 44