Basic Performance Specifications - Oki OKIOFFICE44 Service Manual

1.5

Basic Performance Specifications

Table 1.5.1 shows basic performance specifications.
Note: TF:
FP:
OT:
F:
No.
1 Applicable line
2 Line interface
1) Impedance
2) Sending power level
3) Receiving power level
3 Type of document to be transmitted
1) Width
2) Length
3) Thickness
4) Shape
5) Opacity
General Information
Technical function setting
Function program setting
One-touch key pressed
SELECT FUNCTION key pressed
Table 1.5.1 (1/11) Basic Performance Specifications
Item Specifications
1) Public switched telephone network (PSTN)
2) Private branch exchange (PBX) (OT9+2)
600 ohms balanced
0 dBm to –15 dBm range
(Adjustable in 1 dB steps. TF + 22)
0 dBm to –40 dBm range
Max. 216 mm [8.5 inches] (Letter)
Min. 148 mm [5.83 inches] (ISO A5 size)
Note: Effective reading width is Letter (215 mm/8.46 inches).
Min. 128 mm (5.04 inches)
Max. 356 mm (14 inches)
Long document detection: 356 mm (14 inches) or 60 minutes
* TF + 11 (To enable or disable the long document scanning)
An operator can turn the long document scanning feature on or off
for each call in the operating sequence.
Based on common bond paper,
a) Multiple Page Feeding
0.08 to 0.13 mm (0.003 to 0.005 inches)
b) Single Page Feeding
0.06 to 0.15 mm (.002 to .006 inches)
Rectangular
Documents allowing less than 40% of the scanner source light to
pass through them.
1 - 9 OKIOFFICE 44
Service Manual, P/N 59276801