Report Printing - Oki OKIOFFICE44 Service Manual

Report Printing

This signal route describes the printing route of character data used to print Activity Report, Message Confir-
mation Report, etc.
The report data is read into DRAM in the sequence the contents of data stored in the FLASH memory in
advance under the control of CPU. The contents of data is edited on the DRAM. The data is read out from the
DRAM and sent to IOGA. The data is converted into a serial data by the picture control of IOGA and trans-
ferred to the LED print head for printing as HDATA 0/1.
Board Descriptions A - 18 OKIOFFICE 44 Serv. Man., P/N 59276801