Table of Contents
Advertisement
2.6
AC Cord Connection
The power supply is provided as follows.
Nominal input voltage 120V AC (Voltage range 102 to 127V AC)
Nominal input voltage 230V AC (Voltage range 198 to 250 V AC)
Check whether the AC voltage of your input is within the above-mentioned voltage range
Connect the female plug of the AC cord to the machine.
Insert the male plug of the AC cord to the inlet receptacle.
Check that the display shows "(Time)" message indicating the standby mode.
1) For OKIOFFICE 44
Note:
The OKIOFFICE 44 is NOT equipped
with a AC power switch.
Installation Procedure
AC Inlet
2 - 12
FX048-C2-014
OKIOFFICE 44
Service Manual, P/N 59276801
Advertisement
Table of Contents
Troubleshooting
