4.1.3.13 Registration Roller
(1)
Disassembly procedure
a)
First, carry out procedure up to the point
of the 4.1.3.2 (ID Unit, Cover-Rear, Cover-
NCU and Cover-MAIN).
b)
Move registration roller to the right and
dismount it by lifting. (Two registration
bearings also come off at the same time.
Take care not to lose them.)
(2)
Reassembly procedure
Reverse the disassembly procedures.
Disassembly
Registration bearing
4 - 22
Service Manual, P/N 59276801
Registration roller
(CP4.1 Fig. 28)
OKIOFFICE 44