2.9.2 Technical Functions
This section explains setting items generally conducted by service personnel, not by users.
Table 2.9.1 shows the initial setting items and their purposes. (The default setting is different by the individual
countries.)
Each item can be accessed by entering the corresponding service number on Technical Function.
The detailed procedures of the initial setting items will be explained on the following pages.
Note 1: S-ON: Effective if the service bit has been set to ON.
FP:
Function program setting
TF:
Technical function setting
Note 2: The fonts displayed on the LCD operation panel may differ from fonts written this manual.
Installation Procedure
2 - 18
Service Manual, P/N 59276801
OKIOFFICE 44