Advanced Settings; Port Setting (Spa122 Only) - Cisco SPA112 Administration Manual

Configuring the Network

Advanced Settings

Advanced Settings
Cisco SPA100 Series Phone Adapters Administration Guide
Field
Resync Timer
Auto Recovery After
Reboot
Use the Network Setup > Advanced Settings pages to configure features
including port flow control, MAC address cloning, VPN passthrough, and VLAN.
•

Port Setting (SPA122 Only)

• MAC Address Clone (SPA122 Only)
• VPN Passthrough (SPA122 Only)
• VLAN
Port Setting (SPA122 Only)
Use the Network Setup > Advanced Settings > Port Setting page to set the
ETHERNET (LAN) port attributes.
To open this page: Click Network Setup in the menu bar, and then click
Advanced Settings > Port Settings in the navigation tree. After making changes,
click Submit to save your settings, or click Cancel to abandon any unsaved
entries.
Description
Enter the Resync timer interval value (in seconds). This
timer controls how often the ATA resynchronizes with
the NTP server. The default setting is 3600 seconds.
Choose this option to allow the ATA to automatically
reconnect to the time server after a system reboot.
3
25