Cisco SPA112 Administration Manual page 57

Configuring Voice
Configuring Voice Settings
Cisco SPA100 Series Phone Adapters Administration Guide
• Partners can download the Syslog Server for SPA Devices by using the link
below (login required):
www.cisco.com/en/US/partner/prod/collateral/voicesw/ps6788/phones/
ps10499/syslog_server_for_spa_devices.zip
Enter the settings as described below. After making changes, click Submit to save
your settings, or click Cancel to abandon any unsaved entries.
System Configuration
Field
Restricted Access
Domains
IVR Admin Password
Miscellaneous Settings
Field
Syslog Server
Debug Server
Debug Level
Description
Feature not currently used by the ATA.
Password for the Administrator to manage the ATA
by using the built-in IVR through a connected
handset.
Description
Specify the syslog server name and port. This
feature specifies the server for logging ATA device
system information and critical events. If both
Debug Server and Syslog Server are specified,
Syslog messages are also logged to the Debug
Server.
The debug server name and port. This feature
specifies the server for logging debug information.
The level of detailed output depends on the
debug level parameter setting.
Determines the level of debug information that will
be generated. Select 0, 1, 2, 3 or 3+Router from the
drop-down list. The higher the debug level, the
more debug information will be generated. Level 0
means that no information will be collected. Levels
1, 2 & 3 generate messages related to the voice
ports only. Level 3+Router generates debug
content for both voice and router components.
Default setting: 3
4
57