Cisco SPA112 Administration Manual page 79

Configuring Voice
Configuring Voice Settings
Cisco SPA100 Series Phone Adapters Administration Guide
Distinctive Ring/CWT Pattern Names
Field
Ring1 Name
Ring2 Name
Ring3 Name
Ring4 Name
Ring5 Name
Ring6 Name
Ring7 Name
Ring8 Name
Ring and Call Waiting Tones
IMPORTANT: Ring and Call Waiting tones do not work the same way on all
phones. When setting ring tones, consider the following recommendations:
• Begin with the default Ring Waveform, Ring Frequency, and Ring Voltage.
• If your ring cadence doesn't sound right, or your phone doesn't ring, change
the following settings:
- Ring Waveform: Sinusoid
Description
Name in an INVITE's Alert-Info Header to pick distinctive
ring/CWT 1 for the inbound call. Default setting:
Bellcore-r1.
Name in an INVITE's Alert-Info Header to pick distinctive
ring/CWT 2 for the inbound call. Default setting:
Bellcore-r2.
Name in an INVITE's Alert-Info Header to pick distinctive
ring/CWT 3 for the inbound call. Default setting:
Bellcore-r3.
Name in an INVITE's Alert-Info Header to pick distinctive
ring/CWT 4 for the inbound call. Default setting:
Bellcore-r4.
Name in an INVITE's Alert-Info Header to pick distinctive
ring/CWT 5 for the inbound call. Default setting:
Bellcore-r5.
Name in an INVITE's Alert-Info Header to pick distinctive
ring/CWT 6 for the inbound call. Default setting:
Bellcore-r6.
Name in an INVITE's Alert-Info Header to pick distinctive
ring/CWT 7 for the inbound call. Default setting:
Bellcore-r7.
Name in an INVITE's Alert-Info Header to pick distinctive
ring/CWT 8 for the inbound call. Default setting:
Bellcore-r8.
4
79