Firmware Upgrade; Configuration Management; Backup Configuration - Cisco SPA112 Administration Manual

Administration Settings

Firmware Upgrade

Firmware Upgrade
STEP 1
STEP 2
!
CAUTION

Configuration Management

Cisco SPA100 Series Phone Adapters Administration Guide
Use the Administration > Firmware Upgrade page to upgrade the firmware on the
ATA. It is not necessary to upgrade unless you are experiencing problems with the
ATA or if the new firmware has a feature that you want to use. Before upgrading the
firmware, download the firmware upgrade file for the ATA at:
smallbizvoicegateways
To open this page: Click Administration in the menu bar, and then click Firmware
Upgrade in the navigation tree.
Click Browse and select the location of the upgrade file that you downloaded.
Click the Upgrade button to upgrade the firmware.
Upgrading the firmware may take several minutes. Until the process is complete,
DO NOT turn off the power, press the hardware reset button, or click the Back
button in your current browser.
Use the Administration > Config Management pages to backup and restore the
configuration settings for the ATA.
•

Backup Configuration

• Restore Configuration
Backup Configuration
Use the Administration > Config Management > Backup Configuration page to
back up the ATA configuration settings to a file. You can then later restore these
same settings to the ATA.
To open this page: Click Administration in the menu bar, and then click Backup &
Restore > Backup Configuration in the navigation tree.
5
www.cisco.com/go/
128