Web Access Management - Cisco SPA112 Administration Manual

Administration Settings
Management
Cisco SPA100 Series Phone Adapters Administration Guide

Web Access Management

Use the Administration > Management > Web Access Management page to
configure the settings for access to the administration of the ATA.
To open this page: Click Administration in the menu bar, and then click
Management > Web Access Management in the navigation tree. After making
changes, click Submit to save your settings, or click Cancel to abandon any
unsaved entries.
SPA112: Web Access Management
Web access to the configuration utility is enabled by default. This feature allows
you to manage the configuration from a computer in your office network and from
your home computer via the Internet. To access the configuration utility, launch a
web browser and enter the URL in the Address bar. The URL must include the
specified protocol, the WAN IP address of the ATA, and the specified port number.
For example, with the HTTPS protocol, a WAN IP address of 203.0. 1 13.50, and port
80, you would enter: https://203.0. 1 13.50:80
Field
Web Utility Access
Remote
Management Port
Description
Select the protocol to use for access to the
configuration utility from a device on the WAN. Choose
HTTP and/or HTTPS. For secure Internet access, select
HTTPS. The default value is HTTP.
Enter the port number to use for access to the
configuration utility from a device on the WAN. The
default port number is 80.
5
115