Chapter 2: Quick Setup For Voice Over Ip Service - Cisco SPA112 Administration Manual

Quick Setup for Voice over IP Service
NOTE
STEP 1
STEP 2
Cisco SPA100 Series Phone Adapters Administration Guide
The Quick Setup page is displayed by default when you first log on ATA. You can
use this page to quickly configure the PHONE ports to ensure connectivity to your
provider's Voice over IP network.
Connecting to your service provider's network requires Internet connectivity. With
the default network settings, your ATA should have Internet connectivity when you
connect a cable from the WAN port of the ATA to a port on your router or broadband
network device. For more information, see
To open this page: Click Quick Setup in the menu bar.
Enter the settings for Line 1 (PHONE 1 port) and Line 2 (PHONE 2 port), as
specified by your service provider.
• Proxy: Enter the domain name or URL of the service provider's proxy server.
• Display Name: Enter the name that you want to use to identify your account.
This name typically is used as your Caller ID name.
• User ID: Enter the user ID that is required to log in to your Internet account.
• Password: Enter the password that is required to log in to your Internet
account.
• Dial Plan: Keep the default settings (recommended) or edit the dial plan to
suit your site. For more information, see
Click Submit to save your settings. The voice service will restart.
Internet Settings, page
Configuring Dial Plans, page
2
17.
42.
14