Configuring Voice
Configuring Voice Settings
Cisco SPA100 Series Phone Adapters Administration Guide
Field
VMWI Ring Policy
VMWI Ring Splash
Len
Ring On No New
VM
Description
The parameter controls when a ring splash is played when
a the VM server sends a SIP NOTIFY message to the ATA
indicating the status of the subscriber's mail box. Three
settings are available. Default setting: New VM Available
•
New VM Available: Ring as long as there new
voicemail messages.
•
New VM Becomes Available: Ring at the point when
the first new voicemail message is received.
•
New VM Arrives: Ring when the number of new
voicemail messages increases.
Duration of ring splash when new messages arrive before
the VMWI signal is applied (0 – 10.0s) Default setting: 0
If enabled, the ATA plays a ring splash when the voicemail
server sends SIP NOTIFY message to the ATA indicating
that there are no more unread voice mails. Some
equipment requires a short ring to precede the FSK signal
to turn off VMWI lamp. Default setting: no
4
112