Cisco SPA112 Administration Manual page 89

Configuring Voice
Configuring Voice Settings
Cisco SPA100 Series Phone Adapters Administration Guide
Field
Caller ID Method
FXS Port Power
Limit
Caller ID FSK
Standard
Description
The choices are described below. Default setting:
Bellcore(N.Amer, China)
• Bellcore (N.Amer,China): CID, CIDCW, and
VMWI. FSK sent after first ring (same as ETSI FSK
sent after first ring) (no polarity reversal or DTAS)
• DTMF (Finland, Sweden): CID only. DTMF sent
after polarity reversal (and no DTAS) and before
first ring.
• DTMF (Denmark): CID only. DTMF sent before
first ring with no polarity reversal and no DTAS.
• ETSI DTMF: CID only. DTMF sent after DTAS (and
no polarity reversal) and before first ring.
• ETSI DTMF With PR: CID only. DTMF sent after
polarity reversal and DTAS and before first ring.
• ETSI DTMF After Ring: CID only. DTMF sent after
first ring (no polarity reversal or DTAS)
• ETSI FSK: CID, CIDCW, and VMWI. FSK sent
after DTAS (but no polarity reversal) and before
first ring. Waits for ACK from a device after DTAS
for CIDCW.
• ETSI FSK With PR (UK): CID, CIDCW, and VMWI.
FSK is sent after polarity reversal and DTAS and
before first ring. Waits for ACK from a device after
DTAS for CIDCW. Polarity reversal is applied only
if equipment is on hook.
• DTMF (Denmark) with PR: CID only. DTMF sent
after
polarity reversal (and no DTAS) and before first
ring.
Default setting: Bellcore(N.Amer, China)
The choices are from 1 to 8. Default setting: 3
The ATA supports bell 202 and v.23 standards for caller
ID generation. Default setting: bell 202
4
89