Sip Settings - Cisco SPA112 Administration Manual

Spa100 series phone adapters
Hide thumbs Also See for SPA112:
Table of Contents

Advertisement

Configuring Voice
Configuring Voice Settings
NOTE
Cisco SPA100 Series Phone Adapters Administration Guide

SIP Settings

Use the Voice > SIP page to configure SIP parameters and values.
For a deeper understanding of these fields, refer to Request for Comments (RFC)
3261.
To open this page: Click Voice on the menu bar, and then click SIP in the
navigation tree.
Enter the settings as described below. After making changes, click Submit to save
your settings, or click Cancel to abandon any unsaved entries.
SIP Parameters
Field
Max Forward
Max Redirection
Max Auth
SIP User Agent Name
SIP Server Name
SIP Reg User Agent Name
SIP Accept Language
Description
Max Forward value, which can range from 1 to
255. Default setting: 70.
Number of times an invite can be redirected to
avoid an infinite loop. Default setting: 5.
Maximum number of times (from 0 to 255) a
request may be challenged. Default setting: 2.
User-Agent header used in outbound requests. If
empty, the header is not included. Macro
expansion of $A to $D corresponding to GPP_A to
GPP_D allowed. Default setting: $VERSION.
Server header used in responses to inbound
responses. Default setting: $VERSION.
User-Agent name to be used in a REGISTER
request. If this value is not specified, the SIP User
Agent Name parameter is also used for the
REGISTER request. Default setting: blank.
Accept-Language header used. There is no
default (this indicates that the ATA does not
include this header) If empty, the header is not
included.
4
63

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Spa122

Table of Contents