Cisco SPA112 Administration Manual page 95

Configuring Voice
Configuring Voice Settings
Cisco SPA100 Series Phone Adapters Administration Guide
Field
Reply 182 On Call Waiting
Use Anonymous With
RPID
Use Local Addr In From
Subscriber Information
Field
Display Name
User ID
Password
Use Auth ID
Auth ID
Resident Online Number
Dial Plan
The default dial plan script for each line is as follows: (*xx|[3469]11|0|00|[2-
9]xxxxxx| 1 xxx[2-9]xxxxxx| x xxxxxxxxxxx.)
Each parameter is separated by a semi-colon (;)
Example 1:
*1xxxxxxxxxx<:@fwdnat.pulver.com:5082;uid=jsmith;pwd=xy z
Example 2:
Description
When enabled, the ATA replies with a SIP182
response to the caller if it is already in a call and
the line is off-hook. To use this feature select yes.
Default setting: no.
When set to yes, use "anonymous" in the SIP
message. Default setting: Yes
Use the local ATA IP address in the SIP FROM
message. Default setting: no.
Description
Display name for caller ID.
User ID for this line.
Password for this line.
To use the authentication ID and password for
SIP authentication, select yes. Otherwise, select
no to use the user ID and password. Default
setting: no.
Authentication ID for SIP authentication.
This setting allows you to associate a "local"
telephone number with this line using a valid
Skype Online Number from Skype. Calls made to
that number will ring your phone. Enter the
number without spaces or special characters.
4
95