Table of Contents
Advertisement
When the scanner is first powered on it runs through the start-up sequence and then displays
the Main Menu on the Touch Screen. The Main Menu contains the controls and menus from
which you scan documents, specify the destination of a scanned image, and stop a scan job. It
also lets you control the various features and functions that affect all phases and elements of a
scan sequence or job.
The specific functions available from the Main menu are: Scan to Location; Scan/Stop; Output
Control; Image Control; Format Control; File Control; Transport Control; and Job. Each is
discussed in further detail below.
Scanned images can be directed to different destinations. The name of the user-selected
destination is displayed between the Scan and the Stop button on the Main menu
shows 'Network') and is referred to here as the "scan-to-location area".
By tapping the scan-to-location area (tap on the word 'Network') you can toggle between scan
file destinations. Scan file destinations may include: Network, Printer, FTP, Email, and VGA.
Note
Scan to
USB
portable storage device such as a memory card or a hard drive. This feature can be
added at any time and is available for purchase. For further information on scanning
to USB or to purchase this feature please contact BBH Sales at 800-SCAN-494 or go
to www.bbhscanners.com.
S008459 Rev C
Figure 5.1: Main menu
is an optional feature that allows the scanning of files directly to a USB
5 Main Menu
5.1
Scan to Location
5 Main Menu
(Figure 5.1
Page
of 117
33
Advertisement
Table of Contents
