11. Finally, insert the tray support rod (6)
between the side legs (Figure 1.24)
Figure 1.24
Note
The tray support rod maybe set in
The following images are used to point out the individual components found on the outside of
the scanner:
Front of Scanner
Transport Cover
Left Side of
Scanner
S008459 Rev C
1.4
Touch Screen
Stereo Speaker
Scanner
Figure 1.25: Infinity WF - Front View
three different positions (see the
three insertion holes on the inside
of the legs), depending on the
desired angle of media output
tray.
Note
To mount the scanner on the
stand, refer to
Mounting
Component Identification
Stereo Speaker
Media Output Tray
Floor
Stand
1 Introduction
1.3.1 Floor Stand
in this manual.
Scan Table
USB port for
scanning to a
USB device
Right Side of
Scanner
Page
of 117
11