Figure 13. Multifeed Error; Figure 14. Home Menu Withm - Bell and Howell Copiscan 8000 Spectrum Operator's Manual

Hide thumbs Also See for Copiscan 8000 Spectrum:

Parts manual (24 pages)

Table Of Contents

Table of Contents

5.2.1.2

CLEANING MENU

The CLEANING MENU button allows you to conveniently access the scanner cleaning

menu. This menu gives the option to start the scanner transport so that cleaning sheets

can be fed through the transport and skimmer assembly.

To use the CLEANING MENU feature, press the CLEANING MENU button. A cleaning

menu with START, STOP, and EXIT options will appear on the control panel display.

Select START to start feeding, select STOP to stop feeding, and select EXIT to exit the

cleaning menu.

5.2.1.3

MULTIFEED IGNORE

Figure 14. Home Menu with Multifeed Ignore Enabled

MULTIFEED IGNORE allows a page that would normally trigger a multifeed error to be

fed. It does this by temporarily turning off multifeed detection just for that page. This is

useful for occasional pages within a stack that may falsely trigger a multifeed error, for

instance, because a label has been applied to the document.

MULTIFEED IGNORE enables and disables the multifeed ignore function. The button is

only active after a multifeed error has been reported (Multifeed detection must be set to

STOP in the SETUP menu). Please refer to Section 5.3.3.5, Setting Multifeed Detection

Parameters for more information. After the multifed document is returned to the top of

the stack in the feeder, MULTIFEED IGNORE can be enabled to clear the error and

ignore the multifeed error that would be generated by feeding this document. After this

document is fed, the multifeed detection setting is automatically restored to STOP for the

rest of the batch.

NOTE:

After a multifeed with VRS Auto-Resolve enabled, scanning will resume as soon as

CLEAR or the MULTIFEED IGNORE button is pressed. Be sure that the multifed

document is returned to the top of the stack in the feeder before pressing one of these

keys.

5.2.1.4

The function of this key depends on the current menu displayed. This button selects the

function on the control panel display corresponding directly above the F1 key. The key is

inactive if nothing is displayed.

www.bbhscanners.com

1-800-SCAN-494 Sales

1-800-SCAN-495 Technical Support

Copiscan 8000 Spectrum Operator Manual

Multifeed - To resume

Press CLEAR or MF Ignore