Table of Contents
Advertisement
Cable Set
All items that make up the Cable Set are appropriately marked. The Cable Set consists of:
•
Network cable (used to connect the scanner to the network)
•
Crossover cable (used to connect the scanner directly to a computer)
•
Power cable (used to connect the scanner to a wall outlet)
•
Recovery key (used to restore the scanner to factory defaults in case of an unrecoverable
software error. Instructions are included and can also be found in this manual)
White Balance Calibration Sheet
The White Balance Calibration Sheets are used to adjust the even distribution of light into the
camera. It is very important to perform the White Balance procedure before the first time use of
the scanner. Refer to
Figure 1.2: White Balance Calibration Sheet
Transport Wings
Transport Wings assist the scanner in positioning the document so that an optimum image is
captured. This is especially true when scanning thin and/or delicate documents.
The Infinity WF 36 is delivered with one set of 2 transport wings. The Infinity WF 42 and WF 48
scanners are each delivered with one set of 5 transport wings. For more information about the
transport wings, go to
S008459 Rev C
White Balance
under 4.1.1 Self Test 1 Screen for more details.
Appendix A
in this manual.
Figure 1.3: Transport Wings
1 Introduction
Page 3 of 117
Advertisement
Table of Contents
