Konica Minolta Bizhub C250 / C351 / C450 / 750 / 600 - Setting-Up Of User Authentication On Active Directory; Preparation; Check Tcp/Ip Settings - Konica Minolta bizhub C250 Setting-Up Manual
User authentication in combination with active directory environment, nds environment, smb /ntlm environment
Hide thumbs
Also See for bizhub C250:
- Service manual (1028 pages) ,
- User manual (658 pages) ,
- Operations (508 pages)
Table of Contents
Advertisement
Konica Minolta bizhub C250 / C351 / C450 / 750 / 600 – Setting-up of User authentication on
Active Directory
This chapter described the setting-up procedure for User Authentication function in combination with a
MS Windows server supporting Active Directory. It's mandatory that the C450 is connected to a
TCP/IP network and the correct TCP/IP settings are applied to it.
Preparation
Before setting up user authentication, please collect following information. If you have difficulties to
find the required information, please refer to the appendix "Where to find required Information:
MFP's Administrator password
MFP's IP address
Subnet Mask
Default gateway (optional)
Priority DNS Server address
Substitute 1 DNS Server address (optional)
Substitute 2 DNS Server address (optional)
MFP's DNS Host Name
MFP's DNS Domain Name
Default Domain Name
Valid user account and Password for function
check
Check TCP/IP settings
a) Press the Utility key on the Operation panel
Page 4 of 25
AD_NDS_SMB userauthentication set-up_ver_1_10.doc
Hide quick links:
Advertisement
Table of Contents
