Troubleshooting Postscript (Ps) Errors - Dell 2355 Mono Laser User Manual

Troubleshooting PostScript (PS) Errors

NOTE:
To receive a printed or screen displayed message when PS errors occur, open the Print Options window and
click the desired selection next to the PostScript errors section.
Problem
PostScript file cannot be
printed.
Limit Check Error
A PS error page prints.
The optional tray 2 is not
selected in the driver.
298
Possible Cause
The PostScript option may not be
installed.
The print job may be too complex. Reduce the complexity of the page or try adjusting the
Print job may not be PS.
The printer driver has not been
configured to recognize the
optional tray 2.
Solution
Print a configuration page and verify that the PS version
is available for printing.
print quality settings.
Or, expand the memory capacity.
Ensure that the print job is a PS job. Check to see
whether the software application expected a setup or PS
header file to be sent to the printer.
Open the PostScript driver properties, select the Device
Options tab, and set the Tray Options option to Tray 2.